James Hardie Textured Weatherboards & James Hardie ScyonŽ AxonŽ Panel
Timbakote Timber Pro Rustic FinishTimbakote Timber Pro Rustic is a semi-transparent waterbased coating system that protects from New Zealand’s harsh weather conditions and the effects of strong Ultra Violet (UV) rays. It beautifies the surface by replicating the natural look of timber on James Hardie textured weatherboards and grained panels such as James Hardie Scyon® Axon®.
Timbakote Rustic Basecoat is applied as a first coat of the Rustic Coating System. It is a water based coating that protects fibre cement surfaces such as James Hardie Scyon® Axon® Panel from the affects of weather and harsh Ultra Violet (UV) rays when used in conjunction with Timbakote Timber Pro Rustic.
It assists the coating system to remaining flexible and tough enough to withstand seasonal movements.
Timbakote Timber Pro Rustic is environmentally friendly, non-toxic, non- hazardous, non-flammable and offers 10 year maintained durability on James Hardie Weatherboards.
Fibre cement weatherboards should be clean and surfaces dry and free from contaminants.
Apply 1 coat of Timbakote Rustic Basecoat to all filled and sanded surfaces prior to application of top coats.
Allow up to 2 hours for Timbakote Rustic Basecoat to dry then apply 2-3 coats of Timbakote Timber Pro Rustic to achieve the desired warranty period. Do not over spread, as achieving the correct film build is important to the life of the coating.
The general dry times at a spreading rate of 7 - 12 sq metres per litre are;
Touch Dry 20 minutes
Re-Coat Time 2 hours
Curing Time 7 days
Moderately irritating to eyes, wear splash proof goggles. Flush eyes immediately with plenty of water if coating splashes to the eyes occur. If discomfort persists seek medical attention.
Keep out of children’s reach. Ingestion; Give 1-3 cups of water and seek medical attention.
Timbakote’s durability statement is that if this protective coating is applied correctly on properly prepared surfaces as per label instructions it will not crack, peel or blister during teh warranty period providing the recommended maintenance procedures are carried out and the substrate remains stable.
Any failure of the substrate or previous coating is not covered. If this protective coating fails to perform as specified Timbakote Coatings Ltd will provide free of charge sufficient product to recoat the affected area. In addition to this you may have other remedies at law.
Every care is taken to ensure that the information provided in this data sheet is accurate. Timbakote Coatings Ltd is unable to guarantee results as it has no control over the conditions under which products are applied, the substrate or the application.The customer has to determine the suitability of the delivered products or information for its intended purpose.